- 【EASY INSTALLATION】: The wire on positive pole and negative pole had been connected in advance,just connect to the wire on the machine is ok
- 【APPLICATION】: This co2 laser tube compatible with all the co2 laser engraving and cutting machine that used laser tube as power,but please make sure your machine's installation space,like the diameter and length,all should be a little bigger than laser tube's size
- 【STRONG HEAT RESISTANCE】：The tube body is made of glass containing high borosilicate, the tube body is hard, not easy to deform, heat resistance is strong, and it is not easy to crack at high temperature
- 【STABLE OUTPUT】: Single mode output mode, fine spot, strong penetrating power, no change in long-term use spot mode
- 【UNIQUE TECHNOLOGY】: With excellent sealed-off technology to divide air and prevent inside gas diffusion,the laser tube will be more stable and efficient
Details: Notice:To purchase a laser tube,please confirm your machine's installation space,like the diameter and length,all should be a little bigger than laser tube's size
Working Voltage:15KV (Trigging Voltage=22KV)
Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value)<1ms
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10 to 40centidegree), relative humidity<85%.
Package Dimensions: 46.1 x 7.5 x 6.7 inches